2010 Mazda 3
Mileage
180,400
Service Date
9/19/2023
Services Performed
- RETEST CLUNK NOISE FROM REAR- GONE
- FRONT BRAKES HAVE 9MM LEFT REAR BRAKES HAVE 2MM LEFT -LOW FRONT TIRES HAVE 8/32NDS LEFT REAR TIRES HAVE 7/32NDS LEFT RECOMMEND REPLACE THE REAR PADS AND ROTORS TIRE PRESSURE LIGHT IS ON? SET THE TIRES TO SPECS-OK MINOR CLUNKING NOISE FROM RIGHT FRONT WHEN MAKING RIGHT TURNS RIGHT FRONT SWAY BAR END LINK IS NOISY RECOMMEND REPLACE THE FRONT SWAY BAR END LINKS BOTH SIDES USE THICKER OIL TO PREVENT OIL BURNING
- THE ENGINE MAKES A "WEIRD NOISE" IN THE MORNING HEARD LOUD RATTLE NOISE UPON START UP AFTER PARKING THE CAR FOR 2 HOURS, POSSIBLE VVT NOISE FOUND ENGINE OIL IS VERY LOW FOUND CODE P012 (CAM TIMING OVER RETARDED) AFTER PERFORM SERVICE AND SETTING OIL LEVEL TO SPECS RESET THE ENGINE COMPUTER RESET THE MONITORS TEST DRIVE TO BLEED THE AIR OUT OF VVT SYSTEM RECOMMEND RECHECK THE VVT NOISE WHEN ENGINE IS WARM ONE MORE TIME AND THEN COLD START LET THE ENGINE COOL ALL THE WAY DOWN AGAIN FOR A COLD RESTART TO RETEST VVT PULLEY FOR NOISE NOISE HAS GONE AWAY
- REPLACE REAR BRAKE PADS REPLACE REAR BRAKE ROTORS CLEAN AND LUBE CALIPER SLIDES ROAD TEST
- RETEST NOISE FROM FRONT
- RETEST OPERATION-OK
JULIE C. gave our service a 5 star review on 9/19/2023
